| All specifications are typical at nominal input, full load, and 25บC unless otherwise noted |
| INPUT SPECIFICATIONS |
Input voltage range 5V nominal
..
.....
...
.........
......
9 to 18V 12V nominal
........
..
.........
......
.............
.18 to 36V 24V nominal.......................................................................36 to 75V Input filter
..
.........
.. .......
.Pi Type |
| OUTPUT SPECIFICATIONS |
Output voltage accuracy
.
.......................................
...
.ฑ2% max. Voltage balance, dual output.
......................................................................ฑ2% max. Ripple and noise, 20MHz BW..
......
.
............
..
.........50mV p-p Line regulation, HL-LL.....
.
..............................................
....ฑ0.2% max. Line regulation, FL to 1/4 FL
..
......
............ฑ0.2%(Single), ฑ1%(Dual) Efficiency
..
......
..
..
....
...
SEE TABLE Temperature coefficient
.
......
......
.....
...
ฑ0.02%/บC Short circuit protection
............................
............
..Continuous Transient response recovery time, 25% load step change
.............................................
......200ต sec |
| REMOTE ON/OFF CONTROL |
Control voltage referenced to negative (-)input Compatibility
..........................................
.....CMOS,TTL On-control....
.
......................
.........
4.8V min. or Open Off-control
..
...................................
..0.4V max. or Short |
| GENERAL SPECIFICATIONS |
Switching frequency
..............
......
...
300kHz Isolation voltage
..........
.....
........
..
1600VDC Isolation resistance
....
.
..........
....
.......
.109Ohms |
| ENVIRONMENTAL SPECIFICATIONS (REFERENCE) |
Operating temperature range
.....
......
....
.
..-25บC to +71บC Storage temperature range
....
...........
-55บC to +105บC Case temperature
.............................................
.....
...
100บC max. Cooling
....
.....
......
.....
.Free-air convection EMI/RFI
.....
...
...
........................................................Five-sided continuous MTBF
........................
.7.189 x 105Hour (MIL-HDBK-217F TA=25บC Full Load) |
| PHYSICAL SPECIFICATIONS |
Case Material
.................
..Nickel-Coated Copper with Non-Conductive Base Dimensions
.......
.
...
.1.25 x 0.8 x 0.4 Inches (31.8 x 20.3 x 10.2mm) |