| All specifications are typical at nominal input, full load, and 25บC unless otherwise noted |
| INPUT SPECIFICATIONS |
2 : 1 Input Voltage, 12V nominal
....
........
...
...
.........
9 to 18V 24V nominal
........
..........
........
.......18 to 36V 48V nominal.............................................................36 to 75V 4 : 1 Input Voltage ("W") (Option) 24V nominal..........................................9 to 36V 28V nominal.........................................18 to 75V Input filter
..
...
..... .......
.Pi Type |
| OUTPUT SPECIFICATIONS |
Output voltage accuracy
.
.
................................
...............
...
.ฑ2% Voltage balance, dual outputs
.
.
.........................
..
........
...
.ฑ2% Ripple and noise, 20MHz BW..
.
..
........................
...50mV p-p max. Line regulation..................
.
..
.
........
.......ฑ0.2% Load regulation,FL-1/4FL,single output.................
.
....
..
......
......ฑ0.2% dual output...................
.
......
......
......ฑ0.1% Temperature coefficient
.
........
.....
...
ฑ0.02%/บC Over current protection
....
...
.............
......Continuous |
| GENERAL SPECIFICATIONS |
Switching frequency
........
.......
.
300kHz, typ. Isolation voltage......
....
.....
............................
..1600VDC Isolation resistance......
............
..
...................
.109Ohms,min. Isolation capacitance...
...................................................
..300pF max. |
| ENVIRONMENTAL SPECIFICATIONS (REFERENCE) |
Operating temperature range
.....
....
...
..-25บC to +71บC "M1"(Option)
...........................
-40บC to +85บC "M2"(Option), W series
.....
.
..................-40บC to +71บC Storage temperature range
.....
.....
....................
.-55บC to +105บC Case temperature
.....
...............................
.100บC max. Cooling
.....
.....
...........................................Free-air convection EMI/RFI
.........................
.
..
.Five-sided continuous shield MTBF
.....
..........1.131 x 106 Hours (MIL-HDBK-217F TA=25บC Full Load) |
| PHYSICAL SPECIFICATIONS |
Case Material..
.........................Nickel-Coated Copper with Non-Conductive Base Dimensions
...
.
...
.1.25 x 0.8 x 0.4 Inches (31.8 x 20.3 x 10.2mm) |